Dynaudio BM9S - Subwoofer activ de studio
Tip produs: dynaudio | bm9s | subwooferProducator: Dynaudio
3% reducere pentru contactele prin clubafaceri.ro
Prezentare Dynaudio BM9S - Subwoofer activ de studio
The BM 9S subwoofer is intended to operate with the BM series monitors, more specifically, the BM 5A monitor. It is extremely well-suited for that extra punch to the bottom in setups where space is limited. The BM 9S delivers a clear, crispy and surprisingly powerful punch when you take its almost diminutive size into account. The BM 9S will complement stereo and multichannel monitoring equally well and when daisy-chaining of subwoofers is needed, it sports a low level LFE input/output.
For significant control and enhancement of the general performance, the BM 9S is a closed cabinet type. This creates an internal pressure by which the woofer gains a considerable amount of precision when it comes to the reproduction of low frequent signals. This precision is easily audible and it augments the feeling of reality that the listener experiences.
The BM 9S is very suitable for the following production environments:
Post Production
Music Recording and Mixing
Film Editing (smaller rooms)
DVD authoring and Mastering
Multichannel Production (Audio or Audio for pictures)
Broadcast
Edit suites
OB vans
The BM 9S is designed according to the strict BM series specifications. With a 10” woofer and 200 Watts of power, and virtually minute dimensions, this sub is tailor-made to take care of even the most comprehensive challenges where space is scarce. Being every bit as versatile as the rest of the BM series, BM 9S is a very competent partner for smaller stereo and multichannel setups, giving a very powerful system for even the most demanding users across the globe.
The Auto On/Off function, provides a minimized idle energy usage by shutting off after minutes of no input signal. The auto sensing circuit enables BM9S to automatically come to life when input signal is detected.
The satellite filters that this sub sports, provides high-pass filtering of the monitor source signal allowing 60Hz or 80Hz corner frequencies.
This is a huge advantage for the monitor performance, as the satellites do not need to deal with power consuming lower frequencies. This leaves all the satellite power to greatly accelerate performance and precision.
Main Features:
10” woofer
Phase adjustment in 0° / 180°
Auto on/off, power LED
Mode selection, LFE or slave
Adjustment of low-pass corner frequencies (50-150Hz)
SAT/SUB high-pass adjustment, Flat, 60 Hz, 80 Hz
Small dimensions: 11.6” X 11.4” X 12.5”
200 W @ 4 Ohms
Discrete LFE input, slave output for linking
Closed cabinet for extremely precise low frequency reproduction
Technical data
Model BM 9S
System Active Subwoofer
Frequency Response (+/- 3 dB) 29 Hz - 250 Hz
Low Frequency Limit* 29 Hz
High Frequency Limit* 50 Hz - 250 Hz
Amplifier Power 200 W @ 4 Ohm
Crossover Frequencies HP Sat: Flat / 60 Hz / 80 Hz
Low Pass Filter 50 – 150 Hz
Crossover Slope 2nd order Butterworth
Crossover Bypass Yes (Flat)
Phase adjustment 0° / 180°
Inputs Balanced/XLR
Input Sensitivity for Full Output* 75mV - 5V
Maximum Input 10Vrms
Input Impedance 20 k (+ branch) 10k (- branch)
Output Balanced/XLR
Master / Slave Link Yes
Drive Unit 10" (24 cm), long throw
Magnetic Shielding Yes
Internal Cabinet Volume 15,9 litres
Bass Principle Closed
Power Consumption Max. 325 W
Power Consumption Standby 16 W
Mains Voltage** 100-120V 50/60Hz or 220-240V 50/60Hz
Weight (net) 10 kg / 22 lbs
Dimensions (W x H x D) 294 x 289 x 318 mm / 11.6" x 11.4" x 12.5"
EMC -
Complies with EN 55103-1 and EN 55103-2, FCC part 15 class B, CISPR 22 class B
Safety -
Certified to IEC 60065, EN 60065, UL 6500 and CSA E60065 CSA FILE #LR108093
Enviroment -
Operating temperature 32° F to 122° F (0° C to 50° C)
Storage temperature -22° F to 167° F (-30° C to 70° C)
Humidity Max. 90 % non-condensing
S********************
va rugam sa va autentificati accesand urmatorul buton: