FBT AMICO 10 USB
Tip produs: echipamente sonorizari boxe | amplificatoare | mixereProducator: FBT
3% reducere pentru contactele prin clubafaceri.ro
Prezentare FBT AMICO 10 USB
FBT Amico 10USB, 500W + 2 x 150W Processed Active Sound System, 3-way, tri-amplified Bass-Reflex system. The new AMICO 10USB is a completely integrated, ready-wired sound system offering a convenient plug and play solution for Houses of Worship, church youth group events, school classrooms, auditoriums and various school activities, business conferences and small musical groups performing live in small to medium sized venues.
The mixer, amplification and subwoofer are contained in a single ultra lightweight, yet extremely sturdy polypropylene enclosure. A storage compartment in the rear of the Amico 10USB houses the systems two 2- way satellite speakers, allowing the wheeled system to be transported as a one piece unit.
The AMICO 10USB features a built in professional mixer with 14 input channels and power amp outputs. Built-in mixing console with 6 x XLR mic inputs with phantom power supply, 2 x mono inputs and 4 x stereo input channels, 3-band EQ, 99 selectable digital effects with effects send and return controls, 1 x effects send, 1 x monitor send, headphone jack out and master volume control.
The enclosure features a speaker grille on the front. A cover, also acting as a towing handle, hinges off the top, to reveal a mixer set horizontally, with its connections facing to the rear. The rear cover detaches to allow access to two storage shelves into which satellite speakers, where included, press fit for storage, and the power amplifier, with connectors facing to the rear; two NL4 speaker connectors for the satellite speakers and an IEC power inlet with associated fuse.
The FBT Amico 10 USB features a USB connector to playback music programs/ files from a computer or to record from the master audio output of the AMICO 10 USB to a computer-recording program.
Features
3-way, tri-amplified Bass-Reflex system
14 channel mixer with 99 presets digital multi effect and phantom power
USB connection for music programs in play and record
Subwoofer: 380mm (15”) high efficiency and high excursion custom neodymium magnet woofer with a 75mm (3”) voice coil
2 x Two way satellite speakers: featuring 165mm (6.5”) neodymium magnet woofers with 38mm (1.5”) voice coils, and a 25mm (1”) compression driver coupled to a 90°H x60°V constant directivity horn
500W rms Class D amplifier for subwoofer
2 x 150Wrms Class D amplifier for the satellite speakers
Switch mode power supply
Specification
Configuration: 3 WAY / SUB+2SAT
Internal Amplifiers: 500 + 2x150 Wrms
Mixer Channels: 2mono + 4stereo
Mono Channels
Micro
Quantity and type: 2 x XLR F
Impedance: 2,2 kohm
Max input signal: 0 dBu
Max gain: 75 dB
Equivalent input noise: -128 dB
CMRR (@ main out, gain 75dB): -80 dB
Line
Quantity and type: 2 x JACK balanced
Impedance: 33 kohm
Max input signal: 30 dBu
Max gain (@ main out): 40 dB
Tone
High Shelving (@ 12kHz): ±15 dB
Medium Peaking (@ 2,5kHz): ±12 dB
Low Shelving (@ 80Hz): ±15 dB
Stereo Channels
Micro
Quantity and type: 4 x XLR F
Impedance: 22 kohm
Max input signal: 0 dBu
Max gain: 75 dB
Equivalent input noise: -128 dB
CMRR (@ main out, gain 75dB): -80 dB
Line
Quantity and type: 8 x JACK balanced
Impedance: 22 kohm
Max input signal: 30 dBu
Max gain (@ main out ): 18 dB
Tone
High Shelving (@ 12kHz): ±15 dB
Medium Peaking (@ 2,5kHz): ±12 dB
Low Shelving (@ 80Hz): ±15 dB
Outputs
Impedance: 600 ohms
Mx output (Monitor, Eff, Tape In): 22 dBu
Distortion + Noise @ 16 dBu: 0,025%
Signal/Noise ratio: 96 dB
Frequency response (@ 0 / -1dB): 20Hz - 20kHz
Built In Effect
Sample frequency: 48 kHz
Frequency response: 20Hz - 20kHz
SUB
Configuration: 1 Way
Internal amplifier: 500W SUB + 2 x 150W SAT Wrms
Frequency response @-6dB: 40Hz - 120Hz
Sensitivity (@1W, 1m): 97 dB
Maximum SPL (cont-peak): 124/130 dB
Dispersion: Omni-directional O x V
Low frequency woofer: 1x15 inch
SAT output connectors: 2 x SPEAKON
Satellite
Configuration: 2 Way
Internal amplifier / Recommended: -/150 Wrms
Impedance: 4 ohms
Frequency response: -6dB 90Hz - 20kHz
Sensitivity (@1W, 1m): 93,5 dB
Maximum SPL (cont-peak): 115/125 dB
Dispersion: 90° x 60° O x V
Low frequency woofer: 1x6,5 inch
High frequency driver: 1x1 inch
Input connectors: 1 x SPEAKON
Power supply cable: 5m / 197 Inch
Net dimensions (WxHxD): 478 x 780 x 433mm / 18,8x30,7x17 Inch
Net weight: 34 kg / 74 lb
Transport dimensions (WxHxD): 570 x 880 x 570mm / 22.4 x 36.5 x 22.4 Inch
Transport weight: 38 Kg / 81.6 lb
Supplied accessories: Carrying cover, twin cables, 2 aluminium stands
S********************
va rugam sa va autentificati accesand urmatorul buton:
PRODUSE ASEMANATOARE CU FBT AMICO 10 USB
