Martin Audio WMX
Producator: Martin Audio3% reducere pentru contactele prin clubafaceri.ro
Prezentare Martin Audio WMX
Hybrid™ horn and reflex loaded subwoofer
The Martin Audio WMX is a compact, high performance flown or ground stacked subwoofer featuring our trademark Hybrid™ loading. Primarily intended for use with the W8LM/W8LMD, it shares the same cabinet width and is directly compatible with the W8LM and its flying hardware.
A single long-excursion 18" (460mm)/ 4" (100mm) coil driver is front loaded by a hyperbolic horn with an ultra-low flare rate. The rear of the driver is reflex loaded to extend the LF output to below the natural cut-off point of the horn. This Hybrid™ technique marries the very high efficiency of horn loading with the extended low frequency response of a reflex enclosure.
FEATURES
Very high output compact Hybrid™ folded horn/reflex loaded
subwoofer.
Single 18" (460mm) ultra-long excursion high power drive unit
Frequency response 35Hz-150Hz ± 3dB (-10dB @ 28Hz)
104dB 1W/1m
Fast integral rigging system
Compatable with W8LM and W8LMD line array elements
Can be ground stacked or flown
Socket for pole mounted W8LMD
APPLICATIONS
Dedicated flown or groundstacked sub for use with W8LM and W8LMD
Ground stacked sub with any Martin Audio Wavefront products
Fixed installations
Live sound reinforcement
Corporate events
Theatre sound reinforcement
TECHNICAL SPECIFICATIONS
TYPE
Hybrid™ horn and reflex loaded subwoofer
FREQUENCY RESPONSE (1)
35Hz-150Hz ± 3dB
-10dB @ 28Hz
DRIVERS
18" (460mm)/ 4" (100mm) voice coil, ultra-long
excursion, water resistant cone
RATED POWER (2)
1000W AES, 4000W peak
SENSITIVITY (6,3)
98dB (open space)
104dB (half space)
MAXIMUM SPL (CALCULATED @ Im)
127dB continuous, 133dB peak (open space)
133dB continuous, 139dB peak (half space)
NOMINAL IMPEDANCE
8 ohms
CROSSOVER
70Hz-150Hz active low pass
(via DX1 controller)
ENCLOSURE
Rectangular, multi-laminate birch ply
FINISH
Textured paint
PROTECTIVE GRILLE
Perforated steel
CONNECTORS
2 x Neutrik NL8
FITTINGS
Proprietary rigging system
Interlocking skids on top & bottom
2 generously sized bar handles on each side
Mounting clips for optional lid
Top mounted top hat fitting
DIMENSIONS (inc. wheels)
(W) 620mm x (H) 620mm x (D) 905mm
(1032mm)
(W) 24.4ins x (H) 24.4ins x (D) 35.6ins (40.4ins)
WEIGHT
87kg (191lbs)
S********************
va rugam sa va autentificati accesand urmatorul buton: