Tannoy POWERV12 HP Boxa profesionala activa
Tip produs: boxa activa | boxa profesionala | boxe activeProducator: Tannoy
3% reducere pentru contactele prin clubafaceri.ro
Prezentare Tannoy POWERV12 HP Boxa profesionala activa
Specificatii Tehnice
For higher SPL applications, the POWERV12 HP combines Tannoy?s PowerDual?, point source, constant directivity drive unit with a sophisticated amplifier package integrated within the speaker cabinet. This delivers extended frequency response with high sound pressure levels, outstanding clarity, crystal clear intelligibility, definition and detail. A system optimised for use where such higher output output levels are required for live sound reinforcement, high quality public address or large scale music reinforcement installations.
Efficiency and performance are clearly top of the list of advantages offered by these powered loudspeakers. By eliminating speaker cables and tailoring the signal processing and amplifiers to the combined driver / enclosure system response, the POWERV12 HP offers increased output and reduced distortion for each watt expended. The actual installation process is simplified, as there is no need for heavy external amplifier racks, and setup is faster because fewer components need to be connected and commissioned.
A powerful package of high output and intelligibility provides the solution for high quality music and speech reproduction, this versatile loudspeaker also has, due to effective acoustic matching to the other POWERV Series models, a wide range of applications in larger installations, including nightclub infill, theme bars, performing arts centres, high quality public address, theme parks, leisure venues, audio visual, houses of worship and ?dry hire? rental.
System Type Full Range - Vented
Frequency Response (-3dB) (1) 71Hz - 23kHz
Full Range Mode
Frequency Range (-10dB) (1) 62Hz - 28kHz
Full Range Mode
Frequency Response (-3dB) (1) 100Hz - 23kHz
High Pass Mode
Frequency Range (-10dB) (1) 80Hz - 28kHz
High Pass Mode
Rated Maximum SPL (2) Average: 124dB
Peak: 130dB
Dispersion (-6dB) 75 degrees conical
Driver Complement 300mm (12.00) PowerDual
Crossover Passive 1.75kHz
Directivity Factor (Q) 8.2 averaged 1kHz to 10kHz
Directivity Index (DI) 9.1 averaged 1kHz to 10kHz
Distortion 10% Full Power (16.70V)
2nd Harmonic
250Hz: 0.04%
1kHz: 0.80%
10kHz: 2.11%
3rd Harmonic
250Hz: 0.58%
1kHz: 2.64%
10kHz: 0.11%
1% Full Power (5.3V)
2nd Harmonic
250Hz: 0.24%
1kHz: 1.80%
10kHz: 5.21%
3rd Harmonic
250Hz: 0.67%
1kHz: 4.11%
10kHz: 0.21%
Construction
Enclosure 37.5 litre vented and internally braced 15mm (0.62) birch plywood cabinet
15mm (0.62) MDF front baffle
Vented and internally braced
Finish Textured black or white paint with custom colours on request
Powder coated steel grille with reticulated foam behind
Connectors 1 x female XLR (input)
1 male XLR (link)
1 x Neutrik Powercon
Controls & Indicators Level Control
Power LED (Blue)
Signal LED (Green)
Limit LED (Red)
Full range / High pass switch (110Hz)
Power switch
Fittings
8 x M10 flying inserts
8 x M10 yoke bracket inserts
3 x recessed carrying handles
(2 side & 1 rear)
Blanking plate for optional VTH pole mount
Dimensions (HxWxD) 486 x 370 x 360mm
(19.13 x 14.57 x 14.17)
Weight 23kg
(50.6lbs)
Electronics
Maximum signal input for clip Input attenuator at minimum: +18dBu
Input attenuator at Maximum: +5dBu
Output noise -105dB unweighted, referenced to maximum output (22kHz bandwidth)
Efficiency >90% typically
Damping Factor 400 ref 8 Ohms
Distortion <0.05% @ 1kHz -3dB output (22kHz bandwidth)
Input Impedance 5.6kOhm unbalanced
11.2kOhm balanced
Protection systems
Over Current Excessive over current causes shutdown
Temperature Limiters applied
Brownout Automatic protection & recovery
Mains Inrush current limiting
Indicators 1x Limit LED
1x Signal LED
1x Power LED
Number of channels One
System Type Class D
PSU Specifications
Input Connector Locking Neutrik Powercon
Voltage Selection Automatic (115 / 230V, 45 - 65Hz)
Type High current, high freq. switch-mode
Efficiency >90% typical
Input voltage 100v / 115v / 230v nominal
+/-10%
Mains fuse External
Fuse type T10AT
Other features Automatic soft start
S********************
va rugam sa va autentificati accesand urmatorul buton: