Tannoy VQ 60 boxa de club pasiva

The VQ 60 is a full range, three-way loudspeaker system designed for applications which require very high output capability with class leading pattern control. The VQ 60 is perfectly suited for use in arrays or singly in demanding music or speech applications. Unlike line array solutions, the VQ 60 can produce enough power and clarity to be used individually maintaining your building's aesthetics.



With low frequency extension to 90Hz, the VQ 60 can be combined with various subwoofers for extended bandwidth. The VQ 60 can be configured for use in Bi-Amp or Tri-Amp mode, in conjunction with a suitable digital signal processor (DSP).



Technical Information



VQ 60

PERFORMANCE

System Type 3-Way Full Range - Point Source

Frequency Response (-3dB) 1 115Hz - 23kHz

Frequency Range (-10dB) 1 90Hz - 27kHz

Operating Modes Bi-Amp (LF,MF/HF) User Configurable

Tri-Amp (LF, MF,HF) User Configurable

System Sensitivity & Operating Freq. (1W @1m) 2

BI-AMP

LF (80Hz - 450Hz) 105dB (2.0V @ 4ohms)

Passive MF/HF (450Hz - 23kHz) 115dB (2.83V @ 8ohms)

TRI-AMP

LF (80Hz - 450Hz) 105dB (2.0V @ 4ohms)

MF (450Hz - 7kHz) 115dB (2.83V @ 8ohms)

HF (7kHz - 23kHz) 115dB (2.83V @ 8ohms)

Dispersion (-6dB) 60 degrees conical

DRIVER COMPLEMENT

LF 2 x 300mm (12.00”) Low Frequency Transducers, Semi Horn Loaded

MF/HF Dual Concentric™ Compression driver loaded into a single PSW™ Waveguide

Crossover Frequency Biamp - 450Hz (active) 7kHz (passive)

Tri-amp 450Hz, 7kHz (active)

Directivity Factor (Q) 21.2 averaged 1kHz to 10kHz

Directivity Index (DI) 13.3 averaged 1kHz to 10kHz

RATED MAXIMUM SPL 2

LF 135dB (average) 141dB (peak)

MF 138dB (average) 144dB (peak)

HF 135dB (average) 141dB (peak)

Passive MF/HF 138dB (average) 144dB (peak)

Power Handling 3 Average Programme

LF @ 4ohms 1000W (63.3V) 2000W

MF @ 8ohms 200W (40V) 400W

HF @ 8ohms 90W (27V) 180W

Passive MF/HF @ 8 ohms 200W (40V) 400W

RECOMMENDED AMPLIFIER POWER

LF 2000W into 4ohms

MF 400W into 8ohms

HF 200W into 8ohms

Passive MF/HF 400W into 8ohms

NOMINAL IMPEDANCE

LF 4ohms (4.1 ohms Minimum)

MF 8ohms (7.0 ohms Minimum)

HF 8ohms (8.7 ohms Minimum)

DISTORTION

10% Full Power 2nd Harmonic 3rd Harmonic

250Hz TBA

1kHz TBA

10kHz TBA

DISTORTION

1% Full Power 2nd Harmonic 3rd Harmonic

250Hz TBA

1kHz TBA

10kHz TBA

CONSTRUCTION

Enclosure 18mm (0.71") birch plywood. Vented and internally braced.

Finish Textured black or white paint

(custom colours on request).

Powder coated perforated steel grille.

Connectors Barrier Strip

Fittings 8 x Recessed carrying handles

12 x M10 flying inserts

Dimensions 925mm x 694mm x 515mm

(36.42" x 27.32" x 20.28")

Weight 77kg (177.1 lbs)

Notes

1. Average over stated bandwidth. Measured at 3 metres on axis, then referred to 1 metre

2. Unweighted pink noise input, measured at 3 metres in an anechoic chamber, then referred to 1 metre

3. Accelerated Life Test (EIA RS426-B)A full range of measurements, performance data, and Ease™ Data can be downloaded from www.tannoy.comTannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notification