Monitor Bi-Amplificat Genelec 8340A

Elevate the accuracy of your audio monitoring to a new level with the precision and adaptability of the 8340A Smart Active Monitor.

Top professionals the world over in recording studios, post-production houses, digital edit suites, radio, TV and outside broadcasting have come to rely on the unvarnished truth of the 8340A. Its wide and stable sweet spot promotes accurate, reliable mix decisions, and its bulletproof durability is essential for mission-critical applications.

As a Smart Active Monitor, the 8340A integrates closely with our GLM software via which it can be configured and calibrated for your listening environment, compensating for detrimental room influences to create a truly optimised monitoring solution from mono to immersive. So if you need to work in challenging acoustic spaces, the 8340A is your powerful but clever monitoring companion.

1 x 8340A monitor
1 x mains cable 1,8 m
1 x RJ45 cable 5 m
1 x operating manual

Date tehnice:

45 Hz - 20 kHz (± 1.5 dB)

Low cutoff -6dB
38 Hz

High cutoff -6dB
22 kHz

Peak SPL
≥118 dB

Maximum peak acoustic output per pair in a listening room with music material at 1 m.

Short term max SPL
≥110 dB

Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.

Long term max SPL
≥100 dB

Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver unit protection circuit) at 1 m.

Self-generated noise
≤5 dB SPL

Self generated noise level in free field on axis (A-weighted).

Height
350 mm (13 25/32 in)

Height with Iso-Pod
365 mm (14 3/8 in)

Width
237 mm (9 11/32 in)

Depth
223 mm (8 25/32 in)

Enclosure material
Die cast aluminium

Enclosure type
Reflex port

Driver type
Cone

Diameter
165 mm (6 1/2 in)

Driver type
Metal dome

Diameter
19 mm (3/4 in)

The latency at high frequencies from the input to the acoustic output, measured in the analog input:

Extended Phase Linearity in GLM set to OFF
3.0 ms

In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.

150 W Class D

150 W Class D

100-240 VAC 50/60Hz

ISS Active
≤1 W

Idle
≤12 W

Full output
180 W

Input

Analog signal input connector XLR female, balanced 10 kOhm.

Input

Digital signal input connector XLR female 110 Ohm.

Output

Digital signal output / Thru connector XLR male 110 Ohm.

2 x Control

Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.