DYNACORD DSP244 procesor de sunet
Tip produs: echipamente sonorizari boxe | amplificatoare | mixereProducator: Dynacord
3% reducere pentru contactele prin clubafaceri.ro
Prezentare DYNACORD DSP244 procesor de sunet
Providing 48-bit filter algorithms, 24-bit AD/DA conversion and a dynamic range of 115 dB, the DSP 244 sets new standards for digital loudspeaker controllers and processors. The DSP 244 is an universal Digital Sound System Processor that provides 2 inputs and 4 outputs; plus internal summing of the inputs 1 and 2. Via matrix it is possible to assign the outputs to any input or to the sum of the inputs. It is further possible to establish the following configurations: Stereo or Dual 2-Way systems, 3-Way + Direct and 4-Way systems, each with Mono Subchannel, but also full range systems. High and low-pass filters are provided for the frequency crossover functions in all operation modes. The selection includes Linkwitz-Riley, Butterworth and Bessel type filters with switchable slopes between 6, 12, 18 and 24 dB/oct. A huge number of additional filters offers extremely flexible correction of the frequency response. Each input incorporates a 5-band equalizer, allowing to assign high and low-pass, high and low-shelving or parametric peak-dip filters to its individual filter sections. Next to the frequency crossover filters, four additional filters are employed in each output channel, which also can be set to work as high or low-pass, high or low-shelving filters, parametric peak-dip filters, or all-pass filters. Additional filtering is provided through 2. order high-passes for the realization of B-6 alignment, or special LPN-filters (Low-Pass Notch filters) for correcting the frequency and phase responses of optimally vented woofer cabinets. Each channel additionally provides a delay, a polarity switch, a programmable level control and a digital compressor / limiter while the master delays are located in the input channels.
Mains voltage
90 - 250 V AC / 50 - 60 Hz
Power consumption
20 watts
Safety class
I
Inputs
2 x XLR IN, electronically balanced, transformer optional available 2 x XLR OUT (Direct Out)
Input voltage (nominal)
1.55 V / + 6 dBu
Max. input voltage
24.5 V / + 30 dBu
Input impedance
20 kohms
Common mode rejection
> 40 dB
AD-conversion
24-bit, Sigma-Delta, 128 times oversampling, linear phase
Outputs
4 x XLR OUT, electronically balanced
Output voltage (nominal)
1.55 V / + 6 dBu
Max. output voltage
8.7 V / + 21 dBu
Output impedance
< 100 ohms
Min. load impedance
600 ohms
DA-conversion
24-bit, Sigma-Delta, 128 times oversampling
Frequency response
20 Hz - 20 kHz (- 0.5 dB)
S/N ratio
115 dB (typical)
Distortion without transformer
< 0.01 %
Distortion with transformer
< 0.05 %
Frequency crossovers
6, 12, 18, 24 dB/oct. slope; Butterworth, Bessel, Linkwitz-Riley
Filters
26 parametric equalizers Low-Shelving equalizer, LPN (Lowpass-Notch) switchable Hi-Shelving equalizer, 6 / 12 dB slope switchable, Lo-Cut filter (B-6 alignment switchable), Hi-Cut filter, All-Pass filter
Compressor / limiter
4 digital compressors / limiters
Delay
3 master delays (2 ms - 900 ms), 4 channel delays (0 ms - 900 ms), delay-increment 21 µsec.
Data format
24-bit linear AD / DA conversion, 48-bit processing
Sampling rate
48 kHz
MIDI IN / OUT / THRU
Data Dump, Master / Slave operation/ Remote Control
Display
122 x 32 Dots, graphic LC-Display with LED-background lighting
Dimensions
483 x 43.6 x 374 (WxHxD in mm), 19", 1 HU
Weight
5 kg / 11 lbs
Locking function
protection against inadvertent operation via function-lock
Accessories
PA 1 plexiglas cover 1 HU
Options
NRS 90244 Input transformer, NRS 90243 RS-232 interface, NRS 90247 RS-485 interface, NRS 90246 Contact Closure interface
S********************
va rugam sa va autentificati accesand urmatorul buton: